FF627-4C, Sure-Lok Retractor Kit with Buckle (L Track)

• FF627-4C
• Re-tractor Kit with Buckle and Tab
• FF600 Series Retractors
• Wheelchair Equipment
• Buckle Style
• L-Track Kit
• Made in the USA
• Sure-Lok’s limited warranty coverage applies only to factory defects in materials and workmanship: 1 year limited warranty coverage

S-Hook Style: FF627S-4C

Kit Includes:

• (2) FE200855 Right Hand Retractor with Buckle and Tab, Series L Track
• (2) FE200907 Left Hand Retractor with Buckle and Tab, Series L Track

1. Position the Wheelchair

With wheelchair and occupant facing forward, center the wheelchair between floor tracks or plates. Apply the wheelchair hand brakes and turn off power on motorized wheelchairs.

2. Attach the Front Tie-Downs

The front tie-downs need approximately a 45° angle from the floor. Install the track fitting into a floor track or plate opening that is 3” to 8” outside the front wheel. Pull on fitting to ensure it is properly locked in the track and keeper is facing away from the wheelchair. Loop the other end of the tie-down around a solid structural frame member of the wheelchair as close to the corner junction of the seat cushion as possible and connect hook to the D-ring (for S-hook tie-downs, see step 4). Pull loose end of tie-down through the buckle, until tight. Repeat with other front tie-down. Pull on all four tie-down assemblies to ensure proper attachment.

3. Attach the Rear Tie-Downs

The rear tie-downs need approximately a 45° angle from the floor. Install the track fitting into a floor track or plate opening that is just to the inside of the rear wheel. Pull on fitting to ensure it is properly engaged in the track and keeper is locked in position and facing away from the wheelchair. Loop
other end of tie-down around a solid structural frame member of the wheelchair as close to the corner junction of the wheelchair back and seat as possible, and connect hook to the D-ring (for S-hook tie-downs, see step 4). Unlock buckle and rotate handle to open position, pull loose end of tie-down to remove slack, rotate handle to closed locked position to tension the tie-down. Repeat with rear tie down.

4. S-hooks

Place the S-hooks around a solid structural frame member of the wheelchair as close to the corner junction of the seat cushion as possible and apply tension to the tie-down. Pull on all four tie-downs to ensure proper attachment.

CAUTION:

Do not attach tie-downs to the wheels or any detachable portion of the wheelchair. Tie-down must have a clear, straight path from floor to where it attaches to the wheelchair. Do not allow tie-downs to conform or bend around any object, i.e. the wheels or foot rests. Keep tie-downs away from
sharp edges or corners.

FF600 Series Retractors
A proven, convenient system to secure wheelchair passengers.
The ergonomically designed handle is quick and easy to grasp, the dual,
24-teeth sprocket mechanism enables the user to more easily increase tension on the webbing
and the track fittings are specifically designed to ensure free pivoting action for optimum belt alignment.
The versatility of the system offers users a choice — S-hook or Buckle & Tab hardware attachment styles.

D-Ring
D-ring configuration provides an easy attachment point for the snap hook on an integrated occupant restraint system.

S-Hook Option
S-hook attachment allows for easy, one-handed wheelchair securement.

PLI
The FF600 Series positive-locking retractor offers a choice for operators to tension the retractor to the desired load,
locking the webbing at any length, including when fully retracted into the housing.

Ergonomic Handle
The ergonomically designed handle is quick and easy to grasp when applying tension to the retractor webbing.
The chrome-plated metal cover provides a strong, durable finish.

FF600 retractors, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-down, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable:

• 30mph/20g Impact Test Criteria per SAE J2249
• 30mph/20g Impact Test Criteria per Canadian Z605 Standard
• 30mph/20g Impact Test Criteria per National Standards for School Buses
• 49 CFR Part 38 Americans with Disabilities Act (ADA)
• 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection
• FMVSS 302 Flammability Test
• Certificates of Conformance available upon request

WARNING:
Always secure the occupant in the vehicle with a complete Sure-Lok Occupant Restraint System, consisting of lap and shoulder belts.
Secure the wheelchair in the vehicle with a Sure-Lok Tie-Down System.